Readest vs KOReader: Is the New Cross-Platform Reader Ready to Replace the E-Ink Favorite?

Rhea Calder

Rhea Calder

November 18, 2026

Readest vs KOReader: Is the New Cross-Platform Reader Ready to Replace the E-Ink Favorite?

You already read in KOReader, or you have been told it is the reader to install on any e-ink device, and now Readest keeps showing up in the same threads: open source, polished, available on your laptop, your phone and your Boox at once, with sync built in. The question is whether it can take over from KOReader or whether it belongs next to it. The answer depends less on which app is “better” and more on which screen you read on and how much you care about the e-ink-specific controls KOReader has spent years building.

Two readers built from opposite ends

KOReader started as a document viewer for e-ink hardware. Its interface, rendering engine and menus are designed around slow-refresh screens, physical page buttons and devices with little memory. It runs natively on Kobo, PocketBook, Cervantes and reMarkable devices, on jailbroken Kindles, on Android and on Linux computers. It is licensed under AGPL-3.0, and almost everything about it can be changed, usually through a nested menu or a plugin.

Readest started from the other side. Its README describes it as a modern rewrite of Foliate, the Linux GNOME reader, and it is built with Next.js and Tauri v2 on top of the foliate-js rendering library, with PDF.js handling PDFs. It is also AGPL-3.0. The project targets macOS, Windows, Linux, Android and iOS (including iPadOS), and there is a web version as well. The mobile apps are in the App Store and Google Play, and Linux builds are also on Flathub. In practice it looks and behaves like a modern desktop and phone app that also works on e-ink, rather than an e-ink app that also runs elsewhere.

That difference explains most of what follows. Readest wins where you move between a laptop, a phone and a tablet. KOReader wins where the device itself is the constraint.

Where each app can actually be installed

This is the first filter, and it removes a lot of options before features even matter.

  • Kobo, PocketBook, reMarkable and jailbroken Kindles: only KOReader runs here. These devices do not run Android apps, so Readest is not an option on the device. Readest can still sync with KOReader on them, which is covered below.
  • Android e-ink tablets such as Boox, Bigme or Meebook: both apps install from Google Play or as APKs. This is where the comparison is real.
  • iPhone and iPad: Readest has an iOS app. KOReader does not.
  • Windows and macOS: Readest has native apps. KOReader runs on Linux computers, and its macOS build is described as an emulator meant for development, not a daily reader.
  • Linux desktop: both run. Readest’s Linux build uses an X11 backend, so a Wayland session needs XWayland.

If you only read on a Kobo or Kindle, the decision is made for you: KOReader on the device, and Readest at most as a companion app on your computer or phone.

Formats, PDFs and footnotes

Both readers cover the formats most people actually use. Readest lists EPUB, PDF, MOBI, KF8 (AZW3), FB2, CBZ, TXT, HTML and Markdown. KOReader handles EPUB, FB2, Mobi, DOC, RTF, HTML, CHM and TXT on the reflowable side, and PDF, DjVu, CBT and CBZ on the fixed-layout side. If you have DjVu scans or CHM files, KOReader is the only one of the two that opens them.

PDFs are where the engines differ most. KOReader has long had tools aimed at small e-ink screens: cropping margins, zooming to columns, and reflowing scanned pages so text can be read on a 6- or 7-inch display. Readest renders PDFs with PDF.js, which gives a familiar, accurate page but fewer tools for squeezing a letter-size page onto a small screen. On a 10-inch tablet or a laptop that hardly matters. On a 6-inch Kobo it decides whether a PDF is readable at all.

Footnotes work in both. Readest shows them as popups over the page, and recent development has refined how those popups look. KOReader also shows footnote popups and gives you options for how links and notes behave in EPUBs.

An e-reader with a blank screen and a phone on a wooden desk

Readest on a Boox or other Android e-ink tablet

On an Android e-ink tablet, the main question is how each app handles the screen. KOReader controls refresh behavior itself. You can set how often it does a full refresh to clear ghosting, use the device’s page buttons, and turn off anything animated. Our guide to setting up KOReader on a Boox tablet walks through those settings one by one.

Readest is a web-view app, so on a Boox you rely more on the tablet’s own per-app refresh settings. Readest does pay attention to e-ink devices, though. Its release notes from 2026 mention detecting e-ink devices, forcing a light interface on them, fixes to e-ink paging, and changes to make toggles readable on e-ink screens. Volume keys can turn pages, and page-turn animations can be avoided. Readest also offers decorative page turns such as a paper curl. Those look good on an LCD, but on e-ink they mean more redraws, so leave them off there.

In practice, Readest on a Boox is pleasant for EPUBs, especially on a larger color or monochrome tablet, but it does not give you the refresh controls that make KOReader so steady on e-ink. If you already like the stock Boox reader or another Android app, our roundup of the best reading apps for an Android e-ink tablet shows where Readest-style apps fit against KOReader, Moon+ Reader and ReadEra.

Syncing progress between Readest and KOReader

This is what most people mean when they search for “Readest KOReader plugin,” and it is the reason the two apps do not have to be rivals. Readest’s wiki documents two separate ways to connect them, and you can run both at once.

Option 1: Readest talks to a KOReader sync server

Since version 0.10.1, Readest can log in to a KOReader progress sync server, the same kosync service KOReader’s built-in Progress Sync plugin uses. You can use the public KOReader server or a self-hosted one. The wiki names koreader/koreader-sync-server and myelsukov/koreader-sync as working implementations, and says any server following the same API should work. The setup is:

  1. In Readest, open the menu, then Settings, then the integrations section, then KOReader Sync. Enter the server URL, username and password you use in KOReader, and connect.
  2. Set Readest’s document matching (checksum) method to File Content.
  3. In KOReader, open Progress Sync from the tools menu, log in to the same server, and set the document matching method to Binary.
  4. Push from one device and pull on the other to confirm it works.

The matching step matters. If one side identifies books by file name and the other by file content, they will not recognize each other’s progress. This option syncs reading position only, not highlights or notes. If you want to run your own server for several devices, our walkthrough on KOReader progress sync with your own server covers the server side.

Option 2: the Readest plugin inside KOReader

The second route goes the other way. Readest publishes a KOReader plugin (a .koplugin) on its releases page. Installed in KOReader and signed in with a Readest account, it syncs reading progress, bookmarks, highlights, notes and the book files themselves. The wiki lists Readest 0.11.0 or newer, a matching plugin version, and a recent stable KOReader as requirements.

Once installed, the plugin shows up under Tools, then Readest. From there you can push or pull books, push or pull progress and annotations for the open book, run a full annotation sync, and then turn on auto sync, which runs when a book is opened or closed. You can also browse your Readest cloud library from inside KOReader and long-press a file to add it to Readest. If you signed up for Readest with Google or Apple, you need to set a password in your Readest account first, because the plugin logs in with email and password.

Two caveats from the wiki: books must already be in your Readest cloud before a pull can fetch them, and the Readest sync server does not move progress backward on its own. If one device is behind, pull on that device and push from the one with the latest position.

What the Readest account costs and what it stores

KOReader has no account. Progress sync goes to whichever kosync server you choose, and books travel by USB, Calibre, OPDS, cloud storage or SSH. Readest works without an account too, but its built-in cross-device sync and the KOReader plugin need one.

According to Readest’s pricing page at the time of writing, the free plan includes 500 MB of cloud sync storage, cross-platform sync, and a daily allowance of 10,000 AI translation characters. Plus ($4.99 a month) raises storage to 5 GB, and Pro ($9.99 a month) to 20 GB, with larger translation allowances and extra voices for read-aloud. There are also one-time storage packs. A one-time Full Customization purchase unlocks syncing through your own cloud storage, among other extras. Progress and annotations take little space. The 500 MB matters only if you sync the book files themselves, and a library of illustrated EPUBs or PDFs fills it quickly. Prices and limits change, so check the pricing page before relying on these figures.

If you do not want an account at all, Option 1 above gives you progress sync between Readest and KOReader through your own kosync server, with no Readest cloud involved.

A long library reading room with wooden tables and green lamps

Highlights, dictionaries, translation and read-aloud

Both apps handle highlights, bookmarks and notes. The differences are in where those annotations go afterward.

  • Readest exports annotations from the app and connects to services such as Readwise, Notion, Obsidian and Hardcover. Its site also lists Audiobookshelf and LocalSend integrations. If your highlights end up in a notes app, Readest takes fewer steps.
  • KOReader exports highlights through its exporter plugin to local files and several services, and keeps annotations in sidecar files next to each book, so they move with the book when you copy it.

For lookups, KOReader uses StarDict dictionaries you copy onto the device, plus Wikipedia and translation. Readest offers dictionary and Wikipedia lookup, supports importing custom dictionary packs including Yomitan formats, and has built-in translation through DeepL and Yandex. That makes it a strong pick for reading in a second language.

Read-aloud is a clear Readest strength. It has text-to-speech, plays audiobooks, and supports read-along narration from EPUB 3 media overlays or from a local audio file paired with an EPUB. Listening is not what KOReader is built around, and most dedicated e-readers that run it have no speakers anyway. If you switch between reading and listening, Readest is the app to try.

Getting books in: OPDS, Calibre and file transfer

Both apps can browse OPDS catalogs, which means both work with Calibre’s content server, Calibre-Web, Kavita and similar servers. Readest lists OPDS and Calibre integration, and its recent releases include work on private and authenticated catalogs. KOReader adds Calibre wireless transfer, so Calibre on your computer can send books straight to the device as if it were plugged in, along with metadata search. If you run a self-hosted library, our guide to browsing Calibre-Web in KOReader over OPDS shows the KOReader side of that setup.

Readest’s account adds one more route: upload a book on any device and it appears in your library everywhere else, including inside KOReader through the plugin.

Picking a reader by device and reading habit

Readest is ready to replace KOReader in some setups and not in others. Sort it by the device in your hand:

  • Kobo, Kindle, PocketBook or reMarkable: keep KOReader. Readest cannot run there. If you also read on a phone or laptop, add Readest there and connect the two with either sync option.
  • Small Android e-ink reader or phone-sized device: KOReader is still the safer default, mainly for page-button handling, refresh control and PDF reflow on a small screen.
  • Large Android e-ink tablet used mostly for EPUBs: Readest is a reasonable main reader, especially if you want translation, read-aloud or highlights flowing to Readwise or Obsidian. Turn off page-turn animations and use the tablet’s refresh settings.
  • Scanned PDFs, DjVu or academic papers on e-ink: KOReader, for cropping and reflow.
  • Reading across Mac, Windows, iPhone and an e-reader: Readest on the glass screens, KOReader on the e-ink device, and the Readest plugin to keep progress and highlights in step.
  • No accounts, self-hosted everything: KOReader with your own kosync server, plus Readest’s KOReader Sync option if you want a desktop or phone reader in the loop.

For most people with an e-ink device, the useful answer is not either/or. KOReader remains the more capable reader on e-ink hardware. Readest is the better app for every other screen you own, and its sync options mean you can use both without losing your place.

More articles for you